Advantech 5000 Series - Manual (Page 24)

Chapter 2
Figure 2-6 ADAM-5000E Rail mountings
2.5 Wiring and Conections
This section provides basic information on wiring the power supply
and I/O units, and on connecting the network.
DC Power Supply Unit Wiring
Be sure that the DC power supply voltage remains within the allowed
fluctuation range of between 10 to 30 V
DC
. Terminals +V
S
and GND are
for power supply wiring.
Note: The wire(s) used should be at least 2mm 2 .
ADAM-5000 2-9