Advantech 5000 Series - Manual (Page 53)

Software Utilities
5.1.9 Module Configuration
• Sets the input range, baud rate, data format, checksum status, and/
or integration time for a specified analog input module.
• Sets the output range, baud rate, data format, checksum status and
slew rate for a specified analog output module.
• Sets the baud rate and checksum status for a digital I/O module.
• Sets the input mode, baud rate, checksum status and/or frequency
gate time for a specified counter/frequency module.
Note: Baud rate and Checksum can only be changed in the
INIT* state. Changed settings only take effect after a
module is rebooted.
For Example: The configuration of ADAM-4011
5-14
ADAM-5000