Brooks Instrument GF126 - Manual (Page 40)

2-20
GF100 Series
Installation and Operation Manual
X-TMF-GF100-Series-MFC-eng
Part Number: 541B137AAG
March, 2013
Section 2 Installation
4. The user will be presented the option to override a few of the parameters
being tested prior to actual commissioning. Selecting "Yes" will continue the
process. By selecting "No" the commissioning process will end.
5. After numerous checks are performed, the auto-volume will start. This will
take approximately 5 minutes to complete. The K1 setpoints will then begin.
This process will run for approximately 40-90 minutes.