B&K Precision XLN60026 - Manual - Manual (Page 160)

64
The power supply can be connected via Ethernet (LAN) interface using
Telnet client with the following port:
Telnet Connection
Telnet Port:
5024
Windows XP Users
1.
Open a command prompt window, which can be found by going
to
Start > All Programs > Accessories > Command Prompt.
Alternatively, you can click on
Start, select Run…, and type in
cmd in the Open: input box. Click OK to open Command
Prompt.
2.
At the prompt, type in Telnet5024 where:
is a space.
is the IP address you have configured for the power
supply.
Example: Telnet 192.168.1.150 5024
3.
The following screen will be displayed, and users can enter
remote commands at the prompt, such as
*IDN?.