B&K Precision XLN60026 - Manual - Manual (Page 124)

28
Users can enable/disable external control in this menu option.
An external voltage source (VOLT) or resistor (RES) can be
used to control the output voltage and current. The external
voltage/resistance can be either 0 - 10V/0 - 10K (10V/10K) or
0 - 5V/0 - 5K (5V/5K). Users can also monitor the output
status by reading the monitoring pins (0 - 10V or 0 - 5V) of the
external analog control interface.
7. TIMER CONTROL
Press in the third page of menu to enter TIMER CONTROL
screen.
TIMER:
Turn on/off TIMER function.
TIME:
Set up OUTPUT ON time (Max:999Hr 59Min
59Sec)
8. CALIBRATION
Press in the third page of the menu to enter CALIBRATION
menu. Users must enter the password to access calibration mode. For
calibration details, see “
Calibration ” chapter.
9. Series Connection Control Setting (CHAIN)
Press in Menu setting page to enter CHAIN SETTING
=
=
FF
r n i ec
: L