Alpha Technologies PowerAgent SC3 - Manual (Page 50)

PowerAgent TM SC3 Site Controller Document # 700-000014-01 Rev 2
Installation and Operation
Phoenix Broadband Technologies, LLC 10/28/2010
Page 50 of 57
6.5.6 Provisioning Discrete Alarms
Whenever the A button next to a discrete indicator is pressed the Discrete Alarm Setup display
will be shown. A description of the indicator and the present state will be displayed. The present
state will be color coded with the alarm status, red for Major, yellow for Minor, and black for no
alarm. Use the radio buttons to select either the Disabled, Minor or Major alarm.
All alarm settings are nonvolatile and will be saved in the Site Controller database.
SNMP Traps and/or
Emails may be sent
whenever the alarm
state changes and
when the alarm
returns to the normal
state. Refer to the
Telnet Setup section
of this manual for
information on setting
the Trap destinations
and Email addresses.