Alpha Technologies PowerAgent SC3 - Manual (Page 31)

PowerAgent TM SC3 Site Controller Document # 700-000014-01 Rev 2
Installation and Operation
Phoenix Broadband Technologies, LLC 10/28/2010
Page 31 of 57
6 Navigating the Web Pages
NOTE: The site controller web page uses a java applet, communicating on UDP port
30704, to deliver real time information. If you have trouble viewing the web page this port
may be blocked, contact your IT department.
The status of the batteries that are being monitored by a Site Controller can be viewed using any
network-connected PC that has a web browser.
Type the IP address of the site controller in the browser’s URL address space, for example
“192.168.0.102”. The
controller will serve
the intial web page
which lists all battery
strings discovered,
their total string
voltage and their
status. On the bottom
left hand corner of the
web page you will see
text which toggles
between “Updated”
and “Connected”.
This indicates normal
operation, however, if
you see the message
“Trying to Connect” or
“Unable To Connect”
you may have
problems with a
firewall or router
blocking UDP port
30704. Contact your
IT department for
assistance.
The time displayed at
the lower right of each
web page is the PC
time, not the Site Controller time.