Alpha Technologies PowerAgent SC3 - Manual (Page 40)

PowerAgent TM SC3 Site Controller Document # 700-000014-01 Rev 2
Installation and Operation
Phoenix Broadband Technologies, LLC 10/28/2010
Page 40 of 57
Set the Site Controller Time will set the real time clock in the Site Controller to the PC time. This
is intended to be used to set the real time clock in Site Controllers that do not have access to a
time server. The time is set by sending GMT from the PC to the Site Controller and applying the
time offset programmed in the Site Controller. This may not result in the Site Controller time
being the same as the PC time, allowing the time to be set in Site Controllers that are not in the
same time zone as the PC. If the Site Controller is able to access a time server the time sent
from the PC will be overwritten when the time update occurs at approximately 10 minutes past
the hour.