Extron Electronics TLP 710TV User Guide - Manual (Page 44)

Wall Mounting the TLP 710MV with a Wall Box
The TLP 710MV can be wall mounted using the Extron BB 710M or the Extron
EWB 710M. Follow the instructions provided with the appropriate wall box.
Desktop Mounting the TLP 710TV
Placement without a Mounting Kit
The TLP 710TV comes assembled with a stand that allows it to be placed on a desktop.
To secure the unit to the desktop:
Mounting Holes (2)
Figure 42. TLP 710TV Base (Bottom View), Showing Mounting Holes
1. Mark the location of two holes, 3.07 inches (78 mm) apart.
2. Drill two holes through the desktop from underneath.
3. Attach the TLP 710TV, using two #8 wood screws through the desktop from
underneath into the two holes in the base.
Placement with a Kensington Security Lock
Kensington Security Slot
Figure 43. TLP 710TV Base, Showing Kensington Security Slot
For additional security, the rear edge of the base has a metal-reinforced slot, which may
be used to attach a Kensington Security Lock (not provided). Follow the instructions that
are provided by the manufacturer to install the lock.
TLP 710MV and TLP 710TV • Mounting 38