Extron Electronics TLP 710TV User Guide User Manual
Page 28
3.
Also from the
, download the firmware for the TouchLink
panel. Click the
Firmware
link on the left sidebar.
Figure 23.
Extron Web Page — Download Center
4.
Navigate to the TLP 710MV or TLP 710TV firmware and click
Download
.
This downloads the firmware to your computer. Note the folder in which the firmware
file is saved.
5.
Open the Extron Firmware Loader by clicking on the desktop icon.
6.
Select
TLP 710MV
or
TLP 710TV
from the
Device
drop-down menu.
7.
Select
TCP/IP
from the
Connection Method
drop-down menu.
8.
Enter the IP address for the TLP 710, a Telnet port number (usually 23), and a
password.
9.
In the New Firmware File “Path” pane, navigate to the file that was saved in step 4.
Click the
Add
button. The main Firmware Loader screen opens with the TLP 710MV
or TLP 710TV listed in the device pane.
10.
Click
Begin
. The firmware transfer begins and takes approximately three minutes.
When the Total Progress box shows “Completed,” select
Exit
from the
File
menu to
exit Firmware Loader.
TLP 710MV and TLP 710TV • Configuration Software
22