Updating firmware from a web browser, Or using – Extron Electronics TLP 710TV User Guide User Manual
Page 30
Updating Firmware from a Web Browser
1.
Power on a computer that is connected to the same network as the TLP 710.
2.
From the Extron website (
www.extron.com
), download the firmware for the
touchpanel.
a.
Click the
Download
tab on the Extron home page
b.
Select the
Firmware
option (see figure 23).
c.
Navigate to the touchpanel firmware and click
Download
.
This downloads the firmware to your computer. Note the folder in which the firmware
file is saved.
3.
In the address field of your browser, type the IP address of the TLP 710 unit. The
browser opens the
1
2
3
4
Figure 25.
Firmware Upgrade Web Page
4.
Click the
Configuration
tab (Figure 25,
a
) at the top of the page and then select
Firmware Upgrade
(Figure 25,
b
) from the sidebar on the left.
5.
Click the
Browse
button (Figure 25,
c
) and navigate to the firmware file that was
saved in step 2.
6.
Click
Upload
(Figure 25,
d
). The Touchpanel screen shows the message “Firmware
Uploading... Please Wait...”. When the firmware is uploaded, the screen shows the
message “Restarting...”. Once the firmware is installed, the panel can be calibrated
using the
(see page 19).
TLP 710MV and TLP 710TV • Configuration Software
24