Extron Electronics TLP 710TV User Guide - Manual (Page 25)

If required, locate the Global Configurator program on the disc or website and install that
also. By default, the Installer program creates and places the Global Configurator program
in the
C:\Program Files\Extron\GCx.x folder, where x.x represents the version of the
Global Configurator program. During installation, there is an option to place an icon on the
Windows desktop.
Both programs can be downloaded from the Extron website (
www.extron.com ). Select
the Download tab and click the Software option in the sidebar at the left. Navigate to GUI
Configurator or Global Configurator and click Download next to the program. Follow the
on-screen instructions to complete installation. A folder is created on the C:\ drive and an
icon may be placed on the desktop.
Using the TouchLink Panel Web Pages
Both of the TouchLink panels have default web pages that can be used to read and
change the current settings of the panels. The web pages can be accessed as follows:
1. Open your browser and type the IP address of the TLP 710 unit into the address
field. The browser opens the TouchLink panel
Status page, which is read-only and
provides basic information about the model, date and time, and IP settings.
Figure 19. System Status Page
TLP 710MV and TLP 710TV • Configuration Software 19