Updating the firmware, Updating firmware using extron firmware loader, Updating firmware using extron firmware – Extron Electronics TLP 710TV User Guide User Manual
Page 27: Loader
4.
To upgrade the firmware, select
Firmware Upgrade
. For more detailed instructions,
see
Updating Firmware from a Web Browser
on page 23.
5.
Click the
Touchpanel
tab to access the Touchpanel Configuration page, which allows
the user to alter the touchpanel and volume settings. These correspond to the
(see page 15) in the on-screen menus.
Figure 22.
Touchpanel Configuration Page
Updating the Firmware
Firmware for both touchpanels can be upgraded using the
using
. Before starting,
consult your IT team and ensure that the touchpanel has a unique IP address.
Updating Firmware Using Extron Firmware Loader
1.
Power on a computer that is connected to the same network as the touchpanel.
2.
Install the Extron Firmware Loader utility onto the computer if it is not already present.
This is on the software disc that ships with unit or can be downloaded, free of charge,
from the Extron website (
www.extron.com
).
To install from the disc, insert the disc into the DVD drive of the computer and follow
the same procedure as
Installing GUI Configurator and Global Configurator
(see
page 18).
To install from the Extron website (
www.extron.com
), select the
Download
tab and
then the
Software
tab. Locate the Firmware Loader and click
Download
. Follow the
on-screen instructions to complete installation.
TLP 710MV and TLP 710TV • Configuration Software
21