YSI 600DW-B Sonde - Manual (Page 92)

Sondes Section 2
After configuring your display with the desired parameters, press Esc or 0 to return to the Main menu.
Even if all of the sensors are enabled, the measurements for those sensors will not appear on your display
unless the parameter is selected in Report setup. In order for a specific parameter to show up on a report:
1.
The sensor must first be enabled (turned on).
2. That parameter must be activated in the Report setup.
In the above example, if the appropriate sensors have been activated in the Sensor setup section, the
following parameters will be displayed to the computer screen or captured to a computer or data collection
platform when the sonde is sampling: Temperature in C, Specific Conductance in uS/cm, Free chlorine in
mg/L, pH, ORP in millivolts, Turbidity in NTUs and Chlorophyll in ug/L. Date and time will also be
displayed.
NOTE: Do not attempt to memorize or associate a number or letter with a particular parameter. The
numbering scheme is dynamic and changes depending on the sensors which have been enabled.
The following list is a complete listing of the abbreviations utilized for the various parameters and units
available in the Report setup menu.
Parameter
Description
Date Day/Month/Year (format selectable)
Time Hour:Minute:Second (24-hour clock format)
Temp C Temperature in degrees Celsius
Temp F Temperature in degrees Fahrenheit
Temp K Temperature in degrees Kelvin
SpCond mS/cm Specific Conductance in milliSiemens per centimeter
SpCond uS/cm Specific Conductance in microSiemens per centimeter
Cond mS/cm Conductivity in milliSiemens per centimeter
Cond uS/cm Conductivity in microSiemens per centimeter
Resist MOhm*cm Resistivity in MegaOhms * centimeter
Resist Kohm*cm Resistivity in KiloOhms * centimeter
Resist Ohm*cm Resistivity in Ohms * centimeter
TDS g/L Total dissolved solids in grams per liter
TDS kg/L Total dissolved solids in kilograms per liter
Sal ppt Salinity in parts per thousand (set to local barometer at calibration)
Free Cl2 mg/L Free chlorine concentration in mg/L
Cl2 chrg Free chlorine sensor charge
pH pH in standard units
pH mV millivolts associated with the pH reading
Orp mV Oxidation reduction potential value in millivolts
NH4+ N mg/L Ammonium Nitrogen in milligrams/liter
NH4+ N mV Ammonium Nitrogen in millivolt reading
NH3 N mg/L Ammonia Nitrogen in milligrams/liter
NO3- N mg/L Nitrate Nitrogen in milligrams/liter
NO3- N mV Nitrate Nitrogen in millivolt reading
Cl- mg/L Chloride in milligrams/liter
Cl- mV Chloride in millivolt reading
Turbid NTU Turbidity in nephelometric turbidity units from 6026 sensor
Turbid+ NTU Turbidity in nephelometric turbidity units from 6136 sensor
Chl ug/L Chlorophyll in micrograms/liter
Fluor %FS Fluorescence in percent Full Scale
Rhod ug/L Rhodamine WT in micrograms/liter
YSI Incorporated Drinking Water Monitoring Systems Operations Manual 2-85