YSI 600DW-B Sonde - Manual (Page 252)

Health and Safety Appendix A
APPENDIX A HEALTH AND SAFETY
NOTE: For additional health, safety, and disposal information about YSI reagents, download the MSDS
documents for the chemical in question from the YSI webpage (ysi.com).
YSI Conductivity solutions: 3161, 3163, 3165, 3167, 3168, 3169
INGREDIENTS:
T Iodine
T Potassium Chloride
T Water
Inhalation:
Inhalation of mist or splashes of iodine solution can cause severe irritation, with potential
destruction of respiratory tissues, spasms, and edema (choking) in throat and lungs,
depending on frequency and degree of exposure. Other reported potential effects are
coughing, burning sensation, laryngitis, headache, and nausea.
Use a NIOSH approved respirator for liquid mists and/or splashes. Get supplier
recommendations. Provide adequate ventilation. Avoid conditions that cause misting or
splashing.
Remove to fresh air. Give artificial respiration and get medical attention as needed.
Skin:
May cause irritation with repeated exposure.
Wear water-resistant gloves as needed.
Wash exposed areas with soap and water for 15 minutes. Remove contaminated clothing, and
wash before re-using.
Eyes:
Can cause irritation and potential eye damage with repeated exposure.
Wear splash-proof water-resistant goggles. Have convenient eyewash stations.
Flush with water for 15 minutes.
Ingestion
Can cause irritation of mouth, throat, and an upset stomach.
Wear a mouth cover or face shield when there is splashing.
Do not swallow. Rinse mouth. If swallowed, do not induce vomiting. Get prompt medical
attention.
(No chronic effects reported)
IN ALL CASES: GET MEDICAL ATTENTION IF EFFECTS PERSIST.
Most likely routes of entry: skin, eyes, ingestion.
YSI Incorporated Drinking Water Monitoring Systems Operations Manual A-1