YSI 600DW-B Sonde - Manual (Page 29)

Sondes Section 2
At the bottom of the menu choose the language you prefer for the sonde software. For example, press
7- ( ) English to use the sonde with English menus.
1-Date & time
2-Comm setup
3-Page length=25
4-Instrument ID=YSI Sonde
5-Circuit board SN:00003001
6-GLP filename=00003001
7-SDI-12 address=0
8-(*)English
9-( )Fran?ais
A-( )Deutsch
Select option (0 for previous menu):
Then press
Esc or 0 again to return to the Main menu.
------------------Main-----------------
1-Run 5-System
2-Calibrate 6-Report
3-File 7-Sensor
4-Status 8-Advanced
Select option (0 for previous menu):
ENABLING SENSORS
To activate the sensors that are in your sonde, select
Sensor from the Sonde Main menu.
------------Sensors enabled------------
1-(*)Time
2-(*)Temperature
3-(*)Conductivity
4-(*)Free Cl2
5-(*)ISE1 pH
6-(*)ISE2 Orp
7-(*)ISE3 NH4+
8-(*)ISE4 NO3-
9-( )ISE5 NONE
A-(*)Turbidity 6026
Select option (0 for previous menu):
YSI Incorporated Drinking Water Monitoring Systems Operations Manual 2-22