Rainbow Electronics W79E8213R - Manual (Page 62)

Preliminary W79E8213/W79E8213R Data Sheet
Publication Release Date: July 11, 2008
- 62 - Revision A2
Figure 13-1: Timer/Counters 0 & 1 in Mode 0
13.1.3 Mode 1
Mode 1 is similar to Mode 0 except that the counting register forms a 16-bit counter, rather than a 13-
bit counter. This means that all the bits of THx and TLx are used. Roll-over occurs when the timer
moves from a count of FFFFh to 0000h. The timer overflow flag TFx of the relevant timer is set and if
enabled an interrupt will occur. The selection of the time-base in the timer mode is similar to that in
Mode 0. The gate function operates similarly to that in Mode 0.
Figure 13-2: Timer/Counters 0 & 1 in Mode 1