Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1579 - Manual (Page 7)

Safety
7 PNEG-720-G2 12" & 16" Series II Sweep
FOLLOW SAFETY INSTRUCTIONS
Carefully read all safety messages in this manual and safety
signs on your equipment. Keep signs in good condition.
Replace missing or damaged safety signs. Be sure new
equipment components and repair parts include the current
safety signs. Replacement safety signs are available from the
manufacturer.
Learn how to operate the machine and how to use controls
properly. Do not let anyone operate without instruction.
Keep your machinery in proper working condition. Unautho-
rized modifications to the machine may impair the function
and/or safety and affect machine life.
If you do not understand any part of this manual and need
assistance, contact your dealer.
OPERATE MOTOR PROPERLY
In an emergency, shut down the power source.
Turn off and lock out all power sources before performing any maintenance.
Do not operate electric motor equipped units until motors are properly
grounded.
Disconnect power on electrical driven units before resetting motor overloads.
Do not repetitively stop and start the drive in order to free a plugged condi-
tion. Jogging the drive in this type of condition can damage the auger and/or
drive components.
Electric
Shock
Hazard.
KEEP HANDS AWAY FROM MOVING PARTS
Keep hands and feet away from auger intake and other moving parts.
Rotating auger can sever a person's limbs or even kill.
Keep hair, loose clothing, and shoestrings away from rotating and moving
parts. NEVER wear loose fitting clothing when working around augers.
ALWAYS turn off and lock out all power sources before servicing equipment.
ALWAYS keep belt and chain guards in place during operation.
NEVER attempt to assist machinery operation or to remove trash from equip-
ment while in operation.
Rotating Auger
Read and
Understand
Manual.