beautypg.com

Maintenance – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1579 User Manual

Page 67

background image

Maintenance

55

PNEG-720-G2 12" & 16" Series II Sweep

1. MAINTAIN THE AUGER

A. Use caution when repairing or replacing equipment parts.

B. Make sure ALL decals are legible and tightly attached to the auger. If necessary, replace them

FREE OF CHARGE by contacting GSI at:

GSI

P.O. Box 20

1004 E. Illinois St.

Assumption, IL 62510

(217) 226-4421

C. Ensure that ALL electric motors, etc. are operating at the proper speed.

D. Make sure ALL electrical wiring is not damaged, and that it meets proper wiring codes.

E

Make sure ALL components are in good working condition before use.

ALWAYS shut down and disconnect the power supply before adjusting, servicing
or cleaning the equipment.

Caution! ALL SPEED REDUCERS ARE SHIPPED DRY. OIL MUST BE ADDED
PRIOR TO OPERATION. Do not operate the unit without making sure it contains
the correct amount of oil. Do not overfill or underfill with oil, or injury to
personnel, unit, or other equipment may result.

Caution! Do not mix non-synthetic and synthetic oil in the unit.