Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1579 - Manual (Page 50)

38 12" & 16" Series II Sweep PNEG-720-G2
Assembly
15. ELECTRICAL ASSEMBLY (cont.)
C. Connect the 3/4" x 48" liquid-tight flex conduit to the drive end of the 3/4" rigid conduit
using one (1) 3/4" conduit coupling and one (1) 3/4" liquid-tight flex conduit coupling.
1. Thread a 3/4" conduit coupling onto the 3/4" rigid conduit.
2. Thread a 3/4" flex conduit coupling body onto the 3/4" conduit coupling.
3
Slide a 3/4" flex conduit coupling cap onto the 3/4" flex conduit followed by a plastic ring.
4. Thread a steel ring into the 3/4" flex conduit.
5. Thread the 3/4" flex conduit coupling cap onto the 3/4" flex conduit coupling body.
3/4" flex
conduit
3/4" conduit
coupling
3/4" flex conduit
coupling body
steel ring
plastic ring
3/4" flex conduit
coupling cap
3/4" rigid
conduit
FIG. 15-C