beautypg.com

Assembly – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1579 User Manual

Page 21

background image

Assembly

21

PNEG-720-G2 12" & 16" Series II Sweep

1. BACK SHIELD ASSEMBLY (CONT.)

D. Use eight (8) 5/8"-11 x 1-3/4" grade 8 hex bolts, lock washers, and hex nuts at each section connection.

B. (All 16" Models and 12" Models with extensions) Assemble the caster assembly using the

1/2" x 3-1/2" clevis pin and 1/8" pin clip.

C. Attach the end caster assembly to the end of the tail section using two (2) 1"-8 hex nuts.

The bolts MUST be installed as shown below.

5/8"-11 x 1-3/4" hex bolt

5/8"-11 hex nut

5/8" lockwasher

1/8" pin clip

1/2" x 3-1/2" clevis pin

1"-8 hex nut

end caster assembly

end caster

FIG. 1-C

FIG. 1-D

See also other documents in the category Grain Systems Equipment: