Assembly – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1579 User Manual

Page 30

Text mode
Original mode

12" & 16" Series II Sweep Special PNEG-1579

Assembly

Slide the twelve tooth drive sprocket, bushing and key (see the key chart for your key size) onto the

output shaft of the reducer, making sure both sprockets line up. (See Fig TD3 & TD4)

9. GUARD ASSEMBLY - (CONT.)

Wedging forces in the bushing saw slot, such as that exerted by a narrow
edged regular screw driver, may damage or break the bushing. This damage
would not be covered under the GSI Warranty

1 HP - 5/16" x 2" Key
2 HP - 3/8" x 3-3/4" Key
3 HP - 3/8" x 3" Key

KEY CHART

FIG. TD3

Assemble 12 Tooth Sprocket,
Bushing and key to Gear Reducer
Output Shaft

FIG. TD4

To Assemble the Inner Lower Shaft
Seal, this Sprocket and Bushing
May Have to be Loosened and
Moved Out of the Way

29-A