beautypg.com

Assembly – Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1579 User Manual

Page 39

background image

Assembly

33

PNEG-720-G2 12" & 16" Series II Sweep

12. MOTOR JACK AND BASE ASSEMBLY

Motor Mount
Base Assembly

Motor Jack
Assembly

1/2" hex nuts

FIG. 12

A. Attach the Motor Mount Base Assembly to the Head Section using four (4) 3/4"x 2"bolts, lock washers

and hex nuts. (See Fig 12)

B. Attach the Motor Jack Assembly to the Motor Mount Base Assembly using four (4) 1/2"-13 x 1-1/2" bolts,

1/2" flat washers and 1/2" hex nuts.

1/2" flat washer

1/2" x 1-1/2"
bolts

3/4" hex nuts

3/4" lock washer

3/4" x 2" bolts

Head Section

See also other documents in the category Grain Systems Equipment: