Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1579 - Manual (Page 11)

Decals
11 PNEG-720-G2 12" & 16" Series II Sweep
Please remember safety signs provide important safety information for people working
near bin unloading equipment that is in operation.
Any safety signs that are worn, missing, illegible or painted over should be replaced
immediately. Obtain FREE replacements by contacting GSI.
DECALS
A. The images below show the location of the decals and safety signs which should appear on
the Series II Sweep. (refer to pg. 13-15 for decals)
Decal “A” (DC-1386) on exterior of chain guard
Decal “B” (DC-1416) two (2) per section on front of top flange
Decal “H” (DC-1382) on corner of mount plate
Decal “G” (DC-889) on corner of motor plate
Decal “I” (DC-834) one (1) per section centered on back of top flange
Decal “E” (DC-994) on corner of motor mount
Decal “F” (DC-995) on top of belt guard
Decal “C” (DC-1233) centered on motor mount
Decal “D” (DC-1224) on corner of motor mount
Decal “D” (DC-1224) on front corner of control panel
Decal “G” (DC-889) three (3) on interior of control panel
Control panel located outside of bin.