Ohaus GT Series Electronic Balance - Manual (Page 99)

60
MENUS
PRINT MENU PRINT MENU PRINT MENU PRINT MENU PRINT MENU
The Print menu provides a number of options which includes: reset, communications,
good laboratory practices, and list.
Reset sets all submenus contained in the Print
submenu to factory default settings. Communication specifies baud rate, number of
data bits, parity bit type and stop bits. GLP Good laboratory practices permits the
entering of your own identification number and project number which shows up on
printing.
Print Options Enables/disables Auto print feature, specifies time interval for
automatic output of displayed data and/or a range of displayed weight values that
cannot be output. The following items can be turned on or off: Stable data-only
feature, numeric only or full display data for output, time, date. Also prints reference
weight value when using FillGuide
TM or Parts Counting functions. Difference feature
indicates the difference between weight value currently being used and reference
value set into the balance. Items shown in bold type are default settings. Items shown
in italics in the print menu below appear only if the appropriate Functions are turned
on. Shaded areas only appear in the menu if the appropraite options are selected
in the Setup menu. Items shown in bold type are the default settings.
PRINT OPTIONS
Auto Print
Cont, interval,
on stb,off
off off off off
Initialize Auto Print
Interval, non print lo,
non print hi
Stable Data
ON/OFF OFF OFF OFF OFF
Numeric Data
ON/OFF OFF OFF OFF OFF
Time
ON/OFF OFF OFF OFF OFF
Date
ON/OFF OFF OFF OFF OFF
Reference
ON/OFF OFF OFF OFF OFF/Current
Difference
ON/OFF OFF OFF OFF OFF
End, Print Opts.
LIST
END, PRINT
PRINT MENU PRINT MENU PRINT MENU PRINT MENU PRINT MENU
RESET**
YES/NO
COMMUNICATION
Baud
300, 1200, 2400
2400 2400 2400 2400,
4800, 9600
Data Bits
7
7 7 7 7 or 8
Parity Bit
Odd, Even, None
None None None None,
1, 0
Stop Bits
1 or 2
2 2 2 2
End, Comm.
GLP
ID #
Project #
End,GLP
Print Menu Protection Print Menu Protection Print Menu Protection Print Menu Protection Print Menu Protection
The Print menu may be locked out to prevent unauthorized personnel from changing
settings. If SAFE is displayed, the Print menu has been locked out. Settings may be
viewed but not changed. To lock out the Print menu or unlock, refer to the section titled
Menu Lock-Out Protection.