Ohaus GT Series Electronic Balance - Manual (Page 70)

31
OPERATION
Printing Data (Cont.) Printing Data (Cont.) Printing Data (Cont.) Printing Data (Cont.) Printing Data (Cont.)
Percent Weighing Percent Weighing Percent Weighing Percent Weighing Percent Weighing
Statistical printouts of Percent Weighing
are similar to sampling statistics. Loads
on the balance platform may be displayed
as a percentage from 5% to 100% in 1%
increments. To obtain a printout in this
mode, the balance must be set up in
Percent Weighing. Refer to basic Sam-
pling procedure for operation. The sample
illustration shown at the right had the
balance reference set to 100% using a
weight of 17.398 grams.
Parts Counting Parts Counting Parts Counting Parts Counting Parts Counting
When the balance is in a Parts Count-
ing mode, each time a batch of items
are counted, they can be recorded
statistically by pressing as
described in the Sampling procedure.
The example shown on the left used
a sample weighing 0.496 gram each.
- - - - - START - - - - -
4/01/95
12:00:00 PM
1 5 Pcs
2 5 Pcs
3 15 Pcs
4 23 Pcs
5 36 Pcs
6 42 Pcs
7 52 Pcs
8 50 Pcs
9 41 Pcs
10 50 Pcs
- - - - - - - - - - - - - - - - - - - - -- -
SD Pop.
17.530
Mean 31.900
Sum 319.00
Maximum 52.00
Diff 5.00
Finish 12:05:00 PM
PC Ref 0.496 g
Bal Id 1234
ID 2056853
PR 100012
Name....................................
- - - - - - - - END - - - - - -
- - - - - START - - - - -
4/01/95
12:00:00 PM
1 99.9%
2 100.1%
3 100.0%
4 55.9%
5 123.2%
6 155.9%
7 102.8%
8 102.9%
9 105.9%
10 105.7%
- - - - - - - - - - - - - - - - - - - - -- -
SD Pop.
23.276
Mean 105.230
Sum 1052.30
Maximum 155.90
Diff 100.00
Finish 12:05:00 PM
Bal Id 1234
ID 2056853
PR 100012
Name......................................
- - - - - - END - - - - - -