Ohaus GT Series Electronic Balance - Manual (Page 95)

56
MENUS
Fill Option (Cont.) Fill Option (Cont.) Fill Option (Cont.) Fill Option (Cont.) Fill Option (Cont.)
5. .
If REF WT is selected, a sample reference weight is used later to set the
weight parameter into the balance. If NUMBER is selected, a number
representing the desired sample weight has to be entered. Select either REF WT
or NUMBER.
6. .
7. . When target is selected, the balance will
show the normal weight of the object on the pan.
8. .
9. or . When
zero is selected, the balance indicates the weight as a negative number after
the reference is set in the main menu. When an object is placed on the
balance that weighs exactly what the reference was set to, the display shows
zero with a full bar graph.
10. .
11. .
12. .
13. .
14. .
Time Time Time Time Time
Time is a feature which enables the balance to be set to the current time in either
U.S.A. standards (12 hour periods) or European/Military standards (24 hour periods).
The default setting is US Standard. To enter time, proceed as follows:
1. Access the submenu which is under the Setup menu.
2. .
3. .
4. or .
5. .