Ohaus GT Series Electronic Balance - Manual (Page 79)

40
MENUS
Reset Reset Reset Reset Reset
This submenu enables you to reset all User menu selections to the factory default
settings: Averaging Level 1 1 1 1 1, Stability Range .5d, .5d, .5d, .5d, .5d, Auto-Zero Tracking .5d .5d .5d .5d .5d and Beep
OFF. OFF. OFF. OFF. OFF. Reset does not appear if the menu has been locked out.
1. .
2. .
3. .
4. .
5. to select or .
6. . If is selected, the
balance signals a two short beeps . Reset values are stored only if exited
through .
Averaging Level Averaging Level Averaging Level Averaging Level Averaging Level
Averaging level compensates for vibration or excessive air currents. Factory default
setting is shown in bold type.
AL 0 reduced stability, fastest stabilization time
AL 1 normal stability, normal stabilization time AL 1 normal stability, normal stabilization time AL 1 normal stability, normal stabilization time AL 1 normal stability, normal stabilization time AL 1 normal stability, normal stabilization time
AL 2 more stability, slow stabilization time.
AL 3 maximum stability, slowest stabilization time.
NOTE NOTE NOTE NOTE NOTE: Averaging level does not affect balance accuracy, but it does affect
stabilization time.
To view or change the averaging level:
1. Access the Averaging Level submenu.
2. .
3. to select through .
4. .