Ohaus GT Series Electronic Balance - Manual (Page 100)

61
MENUS
Reset Reset Reset Reset Reset
This submenu enables you to reset all all all all all Print menu selections to the factory default
settings shown below. Reset does not appear if the menu has been locked out.
Function Default
Baud Rate br2400
Data Bits 7 data
Parity None
Stop Bits 2 stop
Auto Print OFF
Autp Print interval 1 second
Non Print Low Limit 0
Non Print High Limit 0
Stable data Only OFF
Numeric Data Only OFF
Time OFF
Date OFF
Reference OFF
Difference OFF
1. .
2. .
3. .
4. .
5. or .
6. . If is selected, the
balance signals a double short beep double short beep double short beep double short beep double short beep and all selections reset tp factory
settings.
Communication Communication Communication Communication Communication
The Communication submenu contains submenus which permit the setting of: baud
rates, data bits, parity and stop bits necessary for communications to an external
printer or computer.
Access the submenu under the Print menu..