Ohaus GT Series Electronic Balance - Manual (Page 71)

32
OPERATION
Printing Data (Cont.) Printing Data (Cont.) Printing Data (Cont.) Printing Data (Cont.) Printing Data (Cont.)
Check Weighing Check Weighing Check Weighing Check Weighing Check Weighing
When the balance is in a Check Weighing
mode, each sample can be checked ei-
ther to show or print an under, accept or
over weight on the printout. Use the
procedure described in Sampling to ob-
tain data by pressing each time a
sample is weighed. A numeric entry of
50.00 grams was used for this sample
printout.
FillGuide FillGuide FillGuide FillGuide FillGuide TM TM TM TM TM
When the balance is in a FillGuide TM mode,
each sample can be checked on the print-
out. By accessing the Custom Units sub-
menu, Density settings can be in Milliliter,
Liters, Fluid Ounces or Quarts . Use the
procedure described in Sampling to obtain
data by pressing each time a
sample is weighed. A standard mass of
2,000 grams was used for this sample
printout and a sample taken each minute.
- - - - - START - - - - -
4/01/9512:00:00 pm
1 50.78 g ACCEPT
2 52.74 g ACCEPT
3 55.25 g ACCEPT
4 57.63 g OVER
5 52.79 g ACCEPT
6 51.78 g ACCEPT
7 50.79 g ACCEPT
8 47.79 g UNDER
9 47.79 g UNDER
10 50.30 g ACCEPT
- - - - - - - - - - - - - - - - - - - - - - - -
SD Pop.
2.682
Mean 51.964
Sum 519.64
Maximum 57.63
Diff 9.84
Finish 12:05:00 PM
Min Ref 50.00 g
Max Ref 53.00 g
Bal Id 1234
ID 2056853
PR 100012
Name......................................
- - - - - - END - - - - - -
4/01/95 12:00:00 PM
1999.9 g
Fill Ref 1999.98 g
Fill Dif - 0.01 g
4/01/94 12:01:00 PM
2023.87 g
Fill Ref 1999.98 g
Fill Dif- 23.89 g
4/01/94 12:02:00 PM
2050.28 g
Fill Ref 1999.98 g
Fill Dif - 50.30 g