Ohaus GT Series Electronic Balance - Manual (Page 47)

8
INSTALLATION
UNPACKING UNPACKING UNPACKING UNPACKING UNPACKING
Your Precision Advanced balance was shipped with the following items:
•
Platform
•
Platform Support
•
Power Cord
•
Below Balance Weighing Hook
•
Draft Shield included with Models: GT210, GT410 and GT410D
•
Instruction Manual
•
Warranty Card
•
In-Service Cover
•
Sealing Kit (Type Approved/Legal for Trade)
It is recommended to save the carton and packing material for storing, transporting the
balance or returning it for service.
PLATE
INSTALLATION INSTALLATION INSTALLATION INSTALLATION INSTALLATION
Environment Environment Environment Environment Environment
The balance should always be used in an environment which is free from excessive
air currents, corrosives, vibration, and temperature or humidity extremes. These
factors will affect displayed weight readings.
DO NOT DO NOT DO NOT DO NOT DO NOT install the balance:
•
Next to open windows or doors causing drafts or rapid temperature changes.
•
Near air conditioning or heat vents.
•
Near vibrating, rotating or reciprocating equipment.
•
Near magnetic fields or equipment that
generates magnetic fields.
•
On an unlevel work surface.
Below Balance Hook Below Balance Hook Below Balance Hook Below Balance Hook Below Balance Hook
A common application for this item is for
determination of density or specific gravity.
Mount the balance on a suitable surface
which allows below balance weighing. If the
below balance hook will be used, it may be
installed in the bottom of the balance. Re-
move the protective plug at the bottom of
the balance and screw the hook into the
threaded hole in the Platform Support which
is visible through the access hole in the
bottom of the balance.
BELOW BALANCE HOOK