Ohaus GT Series Electronic Balance - Manual (Page 58)

19
OPERATION
Display Indications Display Indications Display Indications Display Indications Display Indications
The following table describes each of the display indicators.
DISPLAY INDICATORS DISPLAY INDICATORS DISPLAY INDICATORS DISPLAY INDICATORS DISPLAY INDICATORS
Moveable FineRange Moveable FineRange Moveable FineRange Moveable FineRange Moveable FineRange TM TM TM TM TM (Models GT410D and GT4100D) (Models GT410D and GT4100D) (Models GT410D and GT4100D) (Models GT410D and GT4100D) (Models GT410D and GT4100D)
Models GT410D and GT4100D both contain a Moveable FineRange TM feature. When
the weight of the object on the platform exceeds the capacity limit of the Moveable
FineRange
TM , the balance will automatically change to the coarse range until either:
1. The load is reduced to below the capacity limit of the fine range.
2. tares the balance and recalls the fine range. Taring procedure can
be done repeatedly until capacity of the balance is reached.
Stabilization Stabilization Stabilization Stabilization Stabilization
Before initially using the balance, allow time for it to adjust to its new environment. The
balance only requires to be plugged in to warm up. Recommended warm up period
is twenty (20) minutes. The internal circuits of the balance are powered whenever
it is plugged into a power source.