Ohaus GT Series Electronic Balance - Manual (Page 94)

55
MENUS
Animal Weighing Options Animal Weighing Options Animal Weighing Options Animal Weighing Options Animal Weighing Options
Animal Weighing Options is enabled only when Animal Weighing Function is
selected. Animal weighing settings allow the balance to compensate for animal
activity.
Four settings are available: AW OPT levels, 0 through 3. AW0 should be used for
an inactive subject, where AW3 should be used for an active subject. The default
setting is AW1.
1. Access the submenu under the Setup Option sub-
menu.
2. .
3. , ,
, for desired sensitivity.
4. .
5. .
6. .
Fill Option Fill Option Fill Option Fill Option Fill Option
Fill Option provides two choices for a reference weight (similar to check weighing).
Either a mass can be placed on the platform and used as a reference weight or a
number can be entered to establish the weight value. Both methods are used to
establish a reference for a 100% bar graph reading. Target parameter provides two
choices, one is fill to the reference, the other to zero. The following procedure
describes how to set up the balance for all choices. Before starting, the Fill Function
must have been selected.
1. to select the desired weighing unit, g, dwt, oz, etc.
2. Access the submenu under the Setup Options sub
menu.
3. (reference).
4. (reference weight).