Ohaus MB45 MOISTURE ANALYZER Manual - Manual (Page 6)

4 MB45
Overview of Controls
1
2
3
4
5
6
7
8
9
10
11
1 Turns On or Off display and fan. On returns with last screen. (All modes)
2 When pressed, selects Test Library screen.
3 When pressed, returns to current test, or cycles through several display screens.
4 When pressed, brings up analyzer Setup menu.
5 When pressed, either starts or stops the drying process.
6
When pressed, travels up through menu options, selects alphanumeric
characters.
7 When pressed, travels to the left through displays.
8 When pressed, travels to the right through displays.
9
When pressed, travels down through menu options, selects alphanumeric
characters.
10
When pressed, accepts selection/input (Select mode) or sends Print command
(Run mode).
11 When pressed, performs Tare function. (Pressing during a test has no effect.)
12 Leveling feet Used to level the Moisture Analyzer.
12