Ohaus MB45 MOISTURE ANALYZER Manual - Manual (Page 41)

MB45 39
6.9 Target Weight
Target weight is used when previous samples have been tested and the target weight is known. Target
weight is a reminder to use a consistent sample size.
Using the arrow buttons, scroll to TARG. WGT and press the Enter
button.
Using the arrow buttons, define the target weight and press the Enter
button.
6.10 Print interval
When the printing option has been turned on in the Analyzer Setup menu and an external printer is
connected to the Moisture Analyzer, you have the option of selecting discrete printing intervals of OFF, 1,
3, 5,10, 30 seconds, or 1, 2, 5 minutes. To select a printing interval, proceed as follows:
Using the arrow buttons, scroll to PRINT INT and press the Enter
button.
PRINT INTERVAL
SECONDS
5
EXIT WITHOUT SAVING
Using the arrow buttons, select the desired print interval of either
seconds or minutes and press the Enter button.