Ohaus MB45 MOISTURE ANALYZER Manual - Manual (Page 34)

32 MB45
6.3 Setting the drying profile (cont)
TEST PARAMETERS
TEST ID:
PROFILE:
DRY TEMP:
SWITCH OFF:
RESULT:
CUSTOM:
-DEFAULT-
STANDARD
180C
AUTO 60
MOISTURE%
OFF
Ramp Profile
For this temperature program, the temperature and time elapsed
between the start of drying and the attainment of the final temperature
is set.
Using the arrow buttons, scroll to PROFILE and press the Enter button.
Using the arrow buttons, scroll to RAMP and press the Enter button.
RAMP PROFILE
50 C
3 MIN
END TEMP:
RAMP
TIME:
EXIT WITHOUT SAVING
Enter the desired temperature using the arrow buttons.
Using the arrow buttons, scroll to RAMP TIME. Enter the desired ramp
time using the arrow buttons and press the Enter button.
TEST PARAMETERS
TEST ID:
PROFILE:
DRY TEMP:
SWITCH OFF:
RESULT:
CUSTOM:
-DEFAULT-
STANDARD
180C
AUTO 60
MOISTURE%
OFF
Step Profile
For this temperature program you define the temperature and the hold
time for each step.
Using the arrow buttons, scroll to PROFILE and press the Enter button.
STEP
EXIT WITHOUT SAVING
DRYING PROFILE
Using the arrow buttons, scroll to STEP and press the Enter button.