Ohaus MB45 MOISTURE ANALYZER Manual - Manual (Page 46)

44 MB45
7. Using the Library
The library holds up to 50 tests. Each test consists of a test name and various analyzer settings, which
may be stored, recalled and edited. Each time the Moisture Analyzer is set up to run a new test, the
name of the test and all parameters are automatically stored in the library. When the 51st test is entered,
it can be run, but will not be stored. When the library capacity is exceeded and you want to store a new
test, you must delete a previous test. Recalling a test from the library and pressing the Enter button
initiates the same parameters previously set. If the parameters for a given test have changed, they can
be changed by using the edit function. To use the library function, proceed as follows:
TEST LIBRARY
-EDIT TEST-
01 BUTTER
02 OREO
03 MARGARINE
04 TOBLERONE
05
Entering the library
Press the Test Menu button, TEST LIBRARY is displayed. EDIT TEST is
highlighted. If the instrument is being used for the first time, the library
will be empty. The following examples indicate a library which has
multiple tests stored.
Selecting a previous test
To select a previous test, use the arrow buttons and scroll to the
desired test and press the Enter button. A new screen with the name of
the test is displayed. All of the parameters associated with the test
selected are now available to be run again. You do not have to enter
any new data.
TEST LIBRARY
LOAD TEST
EXIT TO LIBRARY
Running a previous test
Using the arrow buttons, select LOAD TEST and press the Enter button.
The display returns to the Test Library. To run the selected test, press
the Display button and follow instructions on the display.
Editing a previous test
Enter the Test Library. Using the arrow buttons, scroll to the test you
want to edit. Press the Enter button, LOAD TEST is displayed. Scroll
back to EDIT TEST and press the Enter button. The test you have
selected can now be edited. When completing the editing, scroll down
to SAVE TEST and press the Enter button.
TEST LIBRARY
-EDIT TEST-
01 BUTTER
02 OREO
03 MARGARINE
04 TOBLERONE
05
Deleting a previous test
Press Test Menu button, TEST LIBRARY is displayed. Using the arrow
buttons, scroll to the test you want to delete. Press the Enter button,
LOAD TEST is displayed. Press the up arrow button, DELETE TEST is
displayed, press the Enter button. ARE YOU SURE? is highlighted,
using the arrow buttons, select YES and press the Enter button.