Ohaus MB45 MOISTURE ANALYZER Manual - Manual (Page 56)

54 MB45
9. Printing Test Data
Printing data to an external computer or printer requires the communication parameters be set first.
Printing to an external printer or computer will occur each time the Print button is pressed. If the Print
Interval is set in the Test Menu, printing can occur in a continuous fashion at specified intervals.
Samples of weight calibration, temperature calibration and test data (GLP on and GLP off) are shown as
follows:
Weight calibration printout Temperature calibration printout
WEIGHT CALIBRATION #12
DATE:
12.19.01
TIME: 11:20
OHAUS
MB45
S/N: 1234567
REFERENCE WT: ...................
WEIGHT: 20.000 G
CALIBRATION
PERFORMED
SIGNATURE:
[..........................................]
[------------END-----------------]
TEMPERATURE CAL #12
DATE:
12.19.01
TIME: 11:25
OHAUS
MB45
S/N: 1234567
TEMP REFERENCE ID..........
TEMP 100C: 103C
TEMP 160C 161C
CALIBRATION
PERFORMED
SIGNATURE:
[...........................................]
[------------END------------------]