Ohaus MB45 MOISTURE ANALYZER Manual - Manual (Page 21)

MB45 19
4.2 Menu operation (cont)
How to enter alpha numeric data and make selections
Certain menu options can have names or numerical entries made. When
prompted to enter information, use the arrow buttons as follows:
Press the
and arrow buttons to scroll through numbers or alphabet
and to highlight an item in a menu.
Press the arrow button to advance to the next character in the display
or it can be used to highlight an item in a menu.
Press the arrow button to go back to the previous character in the
display or it can be used to highlight an item in a menu.
Press the Enter button to accept entry.
How to access various displays
There are six displays available when the Moisture Analyzer is running a
test and at the end of the test. The Display button on the front panel when
pressed repeately accesses each of the six displays during the run mode
of the analyzer and cycles though each display in the order shown below.
The displays indicate the Test ID, Temperature/Time, Initial Weight, actual
temperature, elasped time duration of the test, either moisture, solids,
percent regain, grams, a graph representing the actual test progress and
statistics.
Press
Display
Ö
TEST ID:
TEMP/TIME:
INITIAL WT:
-DEFAULT-
100°C / 10:00
0.930 GRAMS
08:11
0.00
*
%SOLIDS
100 C
Press
Display
Ö
Press
×
Display
Press
Ø
Display
Press
Display
Õ
Press
Display
Х