Ohaus MB45 MOISTURE ANALYZER Manual - Manual (Page 29)

MB45 27
5.8 Setting Print and GLP Printing On or Off
This menu permits setting print data and GLP printing data on or off. To set the printing functions,
proceed as follows:
TEMP CAL
LANGUAGE
BEEPER
TIME-DATE
RS-232
PRINT
ANALYZER SETUP
Press the Setup button. Using the down arrow button, scroll to PRINT.
Press the Enter button.
Setting print on or off
Using the up/down arrow buttons, select either ON or OFF. Print ON
allows data to be sent to the printer or computer. Press the right arrow
button to advance to GLP.
NOTE: If PRINT INT is turned in on TEST PARAMETER SETUP, the printer is
automatically turned on.
PRINT
OFF
OFF
PRINT:
GLP:
EXIT WITHOUT SAVING
Setting GLP on or off
With GLP ON or OFF highlighted, use the up/down arrow buttons and
select either ON or OFF. GLP ON will auto print in the GLP format from
information in the Test Setup. GLP OFF sends time, temperature and
weight data via RS232 at test Start, the Print Int and test End. Press the
Enter button to save settings. The display returns to ANALYZER SETUP.
PRINT
OFF
OFF PRINT:
GLP:
EXIT WITHOUT SAVING
Exit without saving
If you do not wish to save settings, Use the right arrow button and scroll
to EXIT WITHOUT SAVING and press the Enter button. The display returns
to ANALYZER SETUP.