User and enable mode commands, 1 overview, 2 show commands – ZyXEL Communications GS-4012 User Manual
Page 377: 1 show system-information, Chapter 46 user and enable mode commands, 1 overview 46.2 show commands, User and enable mode commands (377)
GS-4012F/4024 User’s Guide
377
C
H A P T E R
46
User and Enable Mode
Commands
This chapter describes some commands which you can perform in the User and Enable modes.
46.1 Overview
The following command examples show how you can use User and Enable modes to diagnose
and manage your
Switch
.
46.2 show Commands
These are the commonly used
show
commands.
46.2.1 show system-information
Syntax:
show system-information
This command shows the general system information (such as the firmware version and
system up time).
An example is shown next.
Copyright (c) 1994 - 2007 ZyXEL Communications Corp.
sysname# show sys
System Name : GS-4012F
System Contact :
System Location :
Ethernet Address : 00:19:cb:00:00:02
ZyNOS F/W Version : V3.80(TS.0)b5 | 04/13/2007
RomRasSize : 3187522
System up Time : 6:17:27 (228e9a ticks)
Bootbase Version : V3.1 | 03/08/2007
ZyNOS CODE : RAS Apr 12 2007 12:07:33
Product Model : GS-4012F
sysname#