ZyXEL Communications GS-4012 - Manual (Page 346)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
346
member address> password
Sets the cluster member. 13
name name> Sets a descriptive name for the
cluster.
13
rcommand address> Logs into the CLI of the specified
cluster member.
13
default-
management band> Specifies through which traffic
flow the Switch is to send
packets.
13
dhcp dhcp-vlan
id>
Specifies the VLAN ID for the
DHCP VLAN.
13
dhcp relay helper-address
server1> Enables DHCP relay on the
specified VLAN and sets the IP
address of 1 DHCP server.
13
helper-address
server1>
[server2>]
[server3>]
[option]
[information] Enables DHCP relay on the
specified VLAN and sets the IP
address of up to 3 DHCP
servers. Optionally sets the
Switch to add relay agent
information and system name.
13
server starting-
address addr> mask> size-of-
client-ip-pool
<1-253> Enables DHCP server for the
specified VLAN and specifies the
TCP/IP configuration details to
send to DHCP clients.
13
starting-
address addr> mask> size-of-
client-ip-pool
<1-253>
[default-
gateway addr>]
[primary-dns
]
[secondary-dns
] Enables DHCP server for the
specified VLAN and specifies the
TCP/IP configuration details to
send to DHCP clients.
Including default gateway IP
address and DNS server
information.
13
smart-relay Enables DHCP relay for all
broadcast domains on the
Switch.
13
Table 139 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE