ZyXEL Communications GS-4012 - Manual (Page 341)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
341
Displays the specified MVR group
settings.
3
policy Displays all policy related
information.
3
[name] Displays the specified policy
related information.
3
port-access-
authenticator Displays all port authentication
settings.
3
[port-list] Displays port authentication
settings on the specified port(s).
3
port-security Displays all port security settings. 3
[port-list] Displays port security settings on
the specified port(s).
3
radius-accounting Displays RADIUS accounting
server settings.
3
radius-server Displays RADIUS server settings. 3
remote-management Displays all secured client
information.
3
[index] Displays the specified secured
client information.
3
router dvmrp Displays DVMRP settings. 3
igmp Displays global IGMP settings. 3
ospf Displays OSPF settings. 3
ospf area Displays OSPF area settings. 3
ospf network Displays OSPF network (or
interface) settings.
3
ospf redistribute Displays OSPF redistribution
settings.
3
ospf virtual-link Displays OSPF virtual link
settings.
3
rip Displays global RIP settings. 3
vrrp Displays VRRP settings. 3
running-config Displays current operating
configuration.
3
interface port-
channel list> [bandwidth-
limit...] Displays current operating
configuration on a port by port
basis. Optionally specifies which
settings are displayed.
3
help Displays the help information for
this command.
3
service-control Displays service control settings. 3
snmp-server Displays SNMP settings. 3
spanning-tree config Displays Spanning Tree Protocol
(STP) settings.
3
ssh Displays general SSH settings. 3
Table 138 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION PRIVILEGE