ZyXEL Communications GS-4012 - Manual (Page 376)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
376
45.13 mvr Commands
The following table lists the mvr commands in configuration mode.
Table 143 Command Summary: mvr Commands
COMMAND DESCRIPTION
PRIVILEG
E
mvr id> Enters the MVR (Multicast
VLAN Registration)
configuration mode.
13
exit Exist from the MVR
configuration mode.
13
group
start-address
end-address
Sets the multicast group range
for the MVR.
13
inactive Disables MVR settings. 13
mode compatible> Sets the MVR mode (dynamic
or compatible).
13
name Sets the MVR name for
identification purposes.
13
no group Disables all MVR group
settings.
13
group Disables the specified MVR
group setting.
13
inactive Enables MVR. 13
receiver-port
Disables the receiver port(s).An
MVR receiver port can only
receive multicast traffic in a
multicast VLAN.
13
source-port list> Disables the source port(s).An
MVR source port can send and
receive multicast traffic in a
multicast VLAN.
13
tagged Sets the port(s) to untag VLAN
tags.
13
receiver-port
Sets the receiver port(s).An
MVR receiver port can only
receive multicast traffic in a
multicast VLAN.
13
source-port
Sets the source port(s).An
MVR source port can send and
receive multicast traffic in a
multicast VLAN.
13
tagged list> Sets the port(s) to tag VLAN
tags.
13
8021p-priority Sets the 802.1p priority for the
packets belonging to this VLAN
group.
13