ZyXEL Communications GS-4012 - Manual (Page 371)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
371
name string> Sets a name for the port(s). Enter
a descriptive name (up to nine
printable ASCII characters).
13
no arp inspection
trust
Disables this port from being a
trusted port for ARP inspection.
13
arp inspection
limit Resets the ARP inspection rate to
the default (0).
13
bandwidth-limit Disables bandwidth limit on the
port(s).
13
bandwidth-limit
Disables cir bandwidth limits on
the port(s).
13
bandwidth-limit
Disables pir bandwidth limits on
the port(s).
13
bandwidth-limit
Disables egress bandwidth limits
on the port(s).
13
broadcast-limit Disables broadcast storm control
limit on the port(s).
13
dhcp snooping
trust Disables this port from being a
trusted port for DHCP snooping.
13
dhcp snooping
limit rate Resets the DHCP snooping rate
to the default (0).
13
diffserv Disables DiffServ on the port(s). 13
dlf-limit Disables destination lookup failure
(DLF) on the Switch.
13
egress-set list> Disables the egress port setting. 13
ethernet oam Disables Ethernet OAM on the
port(s).
13
ethernet oam mode Resets Ethernet OAM mode to
the default setting (active) on the
ports.
13
ethernet oam
remote-loopback
supported Disables Ethernet OAM remote
loop-back capability on the
port(s).
13
flow-control Disables flow control on the
port(s).
13
ge-spq Disables strict priority queuing on
the Gigabit ports.
13
gvrp Disable GVRP on the port(s). 13
igmp-filtering
profile Disables IGMP filtering. 13
igmp-group-limit Disables IGMP group limitation. 13
igmp-immediate-
leave Disables the IGMP immidiate
leave function.
13
inactive Enables the port(s) on the Switch. 13
Table 140 interface port-channel Commands (continued)
COMMAND DESCRIPTION PRIVILEGE