ZyXEL Communications GS-4012 - Manual (Page 367)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
367
mode priority|round-
robin> Specifies the mode for
TACACS+ server selection.
13
time Sets the time in hour, minute and
second format.
13
date year> Sets the date in year, month and
day format.
13
daylight-saving-
time Enables daylight saving time. 13
end-date
Sets the day and time when
Daylight Saving Time ends.
13
help Displays help for the daylight-
saving-time command.
13
start-date
Sets the day and time when
Daylight Saving Time starts.
13
help Displays help information. 13
timezone <-
1200|...|1200> Selects the time difference
between UTC (formerly known
as GMT) and your time zone.
13
timesync Sets the time server protocol. 13
server Sets the IP address of your time
server.
13
trtcm Enables Two Rate Three Color
Marker on the Switch.
13
mode aware|color-blind> Sets the mode for Two Rate
Three Color Marker on the
Switch.
13
trunk > Activates a trunk group. 13
>lacp Enables LACP for a trunk group. 13
>interface list> Adds a port(s) to the specified
trunk group.
13
interface list> timeout
Defines the port number and
LACP timeout period.
13
vlan Enters the VLAN configuration
mode. See Section 45.12.6 on
page 375 for more information.
13
vlan1q gvrp Enables GVRP. 13
port-isolation Enables port-isolation. 13
vlan-
stacking Enables VLAN stacking on the
Switch.
13
Table 139 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE