ZyXEL Communications GS-4012 - Manual (Page 335)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
335
<0-14> Accesses Enable mode
commands up to the privilege
level specified.
0
erase running-config Resets to the factory default
settings.
13
help Displays help information for this
command.
13
interface port-
channel list> [bandwidth-
limit...] Resets to the factory default
settings on a per port basis and
optionally on a per feature
configuration basis.
13
ethernet
oam remote-loopback
test [packets> [size>]] Performs a loopback test from the
specified port, optionally specifies
how many and the size of packets
sent in the loopback test.
13
exit Exits Enable (or privileged) mode. 0
help Displays help information. 0
history Displays a list of command(s) that
you have previously executed.
0
igmp-flush Removes all IGMP information. 13
kick tcp Disconnects the specified TCP
session.
13
logout Exits Enable (or privileged) mode. 0
mac-flush Clears the MAC address table. 13
Removes all learned MAC
address on the specified port(s).
13
no arp Flushes the ARP table entries. 13
arp inspection filter
vlan
Specify the ARP inspection record
you want to delete from the
Switch. The ARP inspection
record is identified by the MAC
address and VLAN ID pair.
13
interface Clears all counters on the
specified port.
13
logging Disables syslog logging. 13
ping
name> Sends Ping request to an Ethernet
device.
0
[vlan id>][..] Sends Ping request to an Ethernet
device in the specified VLAN(s).
13
reload config Restarts the system and use the
specified configuration file.
13
renew dhcp
snooping
database Loads dynamic bindings from the
default DHCP snooping database.
13
Table 138 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION PRIVILEGE