ZyXEL Communications GS-4012 - Manual (Page 360)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
360
port-
security Enables port security on the
device.
13
Enables port security on the
specified port(s).
13
learn inactive Disables MAC address learning
on the specified port(s).
13
address-limit
Limits the number of (dynamic)
MAC addresses that may be
learned on a port.
13
MAC-freeze Adds learned MAC addresses to
the static MAC table and stops
learning any more MAC
addresses.
13
queue priority <0-7>
level <0-7> Sets the priority level-to-physical
queue mapping.
13
radius-
accounting host Specifies the IP address of
RADIUS accounting server 1 or
RADIUS accounting server 2
(index =1 or index =2).
13
[acct-port
number>] [key
] Sets the port number and key of
the external RADIUS accounting
server.
13
timeout <1-1000> Specifies the RADIUS
accounting server timeout value.
13
radius-
server host Specifies the IP address of
RADIUS server 1 or RADIUS
server 2 (index =1 or index =2).
13
[auth-port
number>] [key
] Sets the port number and key of
the external RADIUS server.
13
timeout <1-1000> Specifies the RADIUS server
timeout value.
13
mode priority|round-
robin> Specifies the mode for RADIUS
server selection.
13
remote-
management start-addr
end-addr
service
icmp|snmp> Specifies a group of trusted
computer(s) from which an
administrator may use a service
to manage the Switch.
13
router dvmrp Enables and enters the DVMRP
configuration mode.
13
exit Leaves the DVMRP
configuration mode.
13
threshold value> Sets the DVMRP threshold
value.
13
Table 139 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE