ZyXEL Communications GS-4012 User Manual
Page 359
Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
359
policy
<
[vlan
[egress-port
[priority <0-7>]
[dscp <0-63>]
[tos <0-7>]
[bandwidth
[outgoing-packet-
format
[out-of-profile-
dscp <0-63>]
[forward-action
[queue-action
replace-tos>]
[diffserv-action
priority|diff-set-
dscp>]
[outgoing-mirror]
[outgoing-eport]
[outgoing-non-
unicast-eport]
[outgoing-set-
vlan]
[metering]
[out-of-profile-
action <[change-
dscp][drop][forwar
d] [set-drop-
precedence]>]
[inactive]>
Configures a policy.
A classifier
distinguishes traffic into flows
based on the configured criteria.
A policy rule ensures that a traffic
flow gets the requested
treatment in the network.
13
port-
access-
authenticat
or
Enables 802.1x authentication
on the Switch.
13
Enables 802.1x authentication
on the specified port(s).
13
reauthenticate
Sets a subscriber to periodically
re-enter his or her username and
password to stay connected to a
specified port.
13
reauth-period
Specifies how often a client has
to re-enter the username and
password to stay connected to
the specified port(s).
13
Table 139 Command Summary: Configuration Mode (continued)
COMMAND
DESCRIPTION
PRIVILEGE