ZyXEL Communications GS-4012 - Manual (Page 353)

Chapter 45 Introducing Commands
GS-4012F/4024 User’s Guide
353
vlan list> Specifies the VLAN IDs for
VLANs you want to disable
DHCP snooping on.
13
vlan list>
information Sets the Switch to not add the
system name to DHCP requests
that it broadcasts to the DHCP
VLAN, if specified, or VLAN.
13
vlan list> option Sets the Switch to not add the
slot number, port number and
VLAN ID to DHCP requests that
it broadcasts to the DHCP VLAN,
if specified, or VLAN.
13
database Removes the location of the
DHCP snooping database.
13
database
timeout Resets how long (10-65535
seconds) the Switch tries to
complete a specific update in the
DHCP snooping database before
it gives up to the default value
(300).
13
database write-
delay Resets how long (10-65535
seconds) the Switch waits to
update the DHCP snooping
database the first time the
current bindings change after an
update to the default value
(65535).
13
dhcp dhcp-vlan Disables DHCP VLAN on the
Switch.
13
diffserv Disables DiffServ on the Switch. 13
ethernet oam Disables Ethernet OAM on the
Switch.
13
igmp-filtering Disables IGMP filtering on the
Switch.
13
profile Removes the specified IGMP
filtering profile.
13
profile
start-address
end-
address Clears the settings of the
specified IGMP filtering profile.
13
igmp-snooping Disables IGMP snooping. 13
8021p-priority Disables changing the priority of
outgoing IGMP control packets.
13
vlan Removes IGMP snooping
configuration on the specified
VLAN.
13
ip Sets the management IP
address to the default value.
13
route
Removes a specified IP static
route.
13
Table 139 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE